|
|
Модуль Toyota Denso Diesel 3 BitEdit
Модуль Toyota Denso Diesel 3 BitEdit
Модуль позволяет производить настройку систем управления дизельным двигателем объемом 4.5 литра автомобилей Toyota с блоками управления Denso 89661-xxxxx.
Карты, доступные для редактирования:
Air control: Airmass corrections by fuel temperature, additive; Desired airmass for low load, Desired airmass; Minimal desired airmass.
Boost pressure: Desired boost pressure; Boost pressure basic map: correction and to limit boost when EGR is active; Boost pressure limiter correction factors; Boost pressure regulation basis; Coolant temperature factor for boost pressure correction, Desired and Final boost pressure limitation(relative), Desired boost pressure monitoring.
Boost pressure: VNT Control: Boost pressure regulator to predict deviation; VNT Control temperature and atmospheric pressure corrections; VNT Controls basis and corrections basis maps; Desired boost pressure limitation(relative), VNT Control maximal and minimal corrections; VNT Control minimal threshold.
EGR Control: EGR position corrections; EGR position limitations; Minimal and Maximal EGR positions requests; Target EGR position corrections; Target EGR Position.
Injection volume: Gear dependent injection volume limiter; Injection volume basis for minimal and maximal limitations; Injection volume corrections; Injection volume limitations; Minimal injection volumes.
Injection volume: conditional corrections.
Injection volume: smoke limitations.
Injector control: Injector opening time for main injection and Pilot injection time.
Limiters: Vehicle speed limitation.
Rail pressure: Rail pressure limitation, Rail pressure regulator basis, Target rail pressure.
Sensors scalings: Boost air temperature, Coolant temperature, Fuel temperature, Intake air temperature and MAF sensors scalings; Temperature correction for MAF sensor.
Start of injection calculation: Start of main and pilot injection.
Torque model: Drag loss torque correction, Fuel pump drag loss part from rail pressure, Fuel temperature drag loss part; Injection volume to Torque and Torque to injection volume conversions maps.
DTC mask
|
Поддерживаемые автомобили:
Toyota Land Cruiser 200 4.5td
Toyota Land Cruiser 70 4.5td
Lexus LX450D
|
Поддерживаемые двигатели:
1VDFTV
|
Обновления описаний для новых версий ПО в рамках модуля бесплатное.
Внимание! Для работы необходим ключ защиты BitEdit
Основные возможности редактора:
- Подходит для использования как новичками, так и опытными калибровщиками.
- Визуализация данных калибровок в табличном, двумерном, трехмерном видах.
- Поддержка редактирования: по дельта(+/-), в процентах, установка значения.
- Поддержка умного копирования и вставки (включая множественное выделение).
- Гибкий и настраиваемый интерфейс с системой докинга.
- Возможность открывать сразу несколько карт калибровок.
- Автоматическое управления параллельными картами (они определены в модуле) с переносом изменений.
- Модульная система, позволяющая избежать лишних затрат.
Программа имеет клиент-серверную архитектуру, для работы требуется обязательное наличие подключения к сети Интернет. Активация дополнительных модулей производится в автоматическом режиме через интернет.
Указанные цены в рублях действительны только для резидентов России, Украины, Белорусии и Казахстана. Ключ без модулей не продаётся!
Загрузки
Module Toyota Denso Diesel 3
License cost: 200.00 Eur.
Software module allows editing and tuning Denso ECU 89661-xxxxx of diesel Toyota & Lexus cars with engines 4.5 litres
The folowing maps are available for editing:
Air control: Airmass corrections by fuel temperature, additive; Desired airmass for low load, Desired airmass; Minimal desired airmass.
Boost pressure: Desired boost pressure; Boost pressure basic map: correction and to limit boost when EGR is active; Boost pressure limiter correction factors; Boost pressure regulation basis; Coolant temperature factor for boost pressure correction, Desired and Final boost pressure limitation(relative), Desired boost pressure monitoring.
Boost pressure: VNT Control: Boost pressure regulator to predict deviation; VNT Control temperature and atmospheric pressure corrections; VNT Controls basis and corrections basis maps; Desired boost pressure limitation(relative), VNT Control maximal and minimal corrections; VNT Control minimal threshold.
EGR Control: EGR position corrections; EGR position limitations; Minimal and Maximal EGR positions requests; Target EGR position corrections; Target EGR Position.
Injection volume: Gear dependent injection volume limiter; Injection volume basis for minimal and maximal limitations; Injection volume corrections; Injection volume limitations; Minimal injection volumes.
Injection volume: conditional corrections.
Injection volume: smoke limitations.
Injector control: Injector opening time for main injection and Pilot injection time.
Limiters: Vehicle speed limitation.
Rail pressure: Rail pressure limitation, Rail pressure regulator basis, Target rail pressure.
Sensors scalings: Boost air temperature, Coolant temperature, Fuel temperature, Intake air temperature and MAF sensors scalings; Temperature correction for MAF sensor.
Start of injection calculation: Start of main and pilot injection.
Torque model: Drag loss torque correction, Fuel pump drag loss part from rail pressure, Fuel temperature drag loss part; Injection volume to Torque and Torque to injection volume conversions maps.
DTC mask
|
Cars supported:
Toyota Land Cruiser 200 4.5td
Toyota Land Cruiser 70 4.5td
Lexus LX450D
|
Engines supported:
1VDFTV
|
Description updates for new software versions within the module are free of charge.
Module requires security USB dongle
The main features of the editor:
- Suitable for use by both beginners and experienced calibrators.
- Visualization of calibration data in tabular, two-dimensional, three-dimensional forms.
- Editing support: delta(+/-), percentage, value setting.
- Support for smart copy and paste (including multiple selection).
- Flexible and customizable interface with docking system.
- Ability to open several calibration cards at once.
- Automatic management of parallel maps (they are defined in the module) with the transfer of changes./
- Modular system to avoid unnecessary costs.
Downloads
Модуль Toyota Denso Diesel 3 BitEdit
Модуль позволяет производить настройку систем управления дизельным двигателем объемом 4.5 литра автомобилей Toyota с блоками управления Denso 89661-xxxxx.
Карты, доступные для редактирования:
Air control: Airmass corrections by fuel temperature, additive; Desired airmass for low load, Desired airmass; Minimal desired airmass.
Boost pressure: Desired boost pressure; Boost pressure basic map: correction and to limit boost when EGR is active; Boost pressure limiter correction factors; Boost pressure regulation basis; Coolant temperature factor for boost pressure correction, Desired and Final boost pressure limitation(relative), Desired boost pressure monitoring.
Boost pressure: VNT Control: Boost pressure regulator to predict deviation; VNT Control temperature and atmospheric pressure corrections; VNT Controls basis and corrections basis maps; Desired boost pressure limitation(relative), VNT Control maximal and minimal corrections; VNT Control minimal threshold.
EGR Control: EGR position corrections; EGR position limitations; Minimal and Maximal EGR positions requests; Target EGR position corrections; Target EGR Position.
Injection volume: Gear dependent injection volume limiter; Injection volume basis for minimal and maximal limitations; Injection volume corrections; Injection volume limitations; Minimal injection volumes.
Injection volume: conditional corrections.
Injection volume: smoke limitations.
Injector control: Injector opening time for main injection and Pilot injection time.
Limiters: Vehicle speed limitation.
Rail pressure: Rail pressure limitation, Rail pressure regulator basis, Target rail pressure.
Sensors scalings: Boost air temperature, Coolant temperature, Fuel temperature, Intake air temperature and MAF sensors scalings; Temperature correction for MAF sensor.
Start of injection calculation: Start of main and pilot injection.
Torque model: Drag loss torque correction, Fuel pump drag loss part from rail pressure, Fuel temperature drag loss part; Injection volume to Torque and Torque to injection volume conversions maps.
DTC mask
|
Поддерживаемые автомобили:
Toyota Land Cruiser 200 4.5td
Toyota Land Cruiser 70 4.5td
Lexus LX450D
|
Поддерживаемые двигатели:
1VDFTV
|
Обновления описаний для новых версий ПО в рамках модуля бесплатное.
Внимание! Для работы необходим ключ защиты BitEdit
Основные возможности редактора:
- Подходит для использования как новичками, так и опытными калибровщиками.
- Визуализация данных калибровок в табличном, двумерном, трехмерном видах.
- Поддержка редактирования: по дельта(+/-), в процентах, установка значения.
- Поддержка умного копирования и вставки (включая множественное выделение).
- Гибкий и настраиваемый интерфейс с системой докинга.
- Возможность открывать сразу несколько карт калибровок.
- Автоматическое управления параллельными картами (они определены в модуле) с переносом изменений.
- Модульная система, позволяющая избежать лишних затрат.
Программа имеет клиент-серверную архитектуру, для работы требуется обязательное наличие подключения к сети Интернет. Активация дополнительных модулей производится в автоматическом режиме через интернет.
Указанные цены в рублях действительны только для резидентов России, Украины, Белорусии и Казахстана. Ключ без модулей не продаётся!
Загрузки
Module Toyota Denso Diesel 3
License cost: 200.00 Eur.
Software module allows editing and tuning Denso ECU 89661-xxxxx of diesel Toyota & Lexus cars with engines 4.5 litres
The folowing maps are available for editing:
Air control: Airmass corrections by fuel temperature, additive; Desired airmass for low load, Desired airmass; Minimal desired airmass.
Boost pressure: Desired boost pressure; Boost pressure basic map: correction and to limit boost when EGR is active; Boost pressure limiter correction factors; Boost pressure regulation basis; Coolant temperature factor for boost pressure correction, Desired and Final boost pressure limitation(relative), Desired boost pressure monitoring.
Boost pressure: VNT Control: Boost pressure regulator to predict deviation; VNT Control temperature and atmospheric pressure corrections; VNT Controls basis and corrections basis maps; Desired boost pressure limitation(relative), VNT Control maximal and minimal corrections; VNT Control minimal threshold.
EGR Control: EGR position corrections; EGR position limitations; Minimal and Maximal EGR positions requests; Target EGR position corrections; Target EGR Position.
Injection volume: Gear dependent injection volume limiter; Injection volume basis for minimal and maximal limitations; Injection volume corrections; Injection volume limitations; Minimal injection volumes.
Injection volume: conditional corrections.
Injection volume: smoke limitations.
Injector control: Injector opening time for main injection and Pilot injection time.
Limiters: Vehicle speed limitation.
Rail pressure: Rail pressure limitation, Rail pressure regulator basis, Target rail pressure.
Sensors scalings: Boost air temperature, Coolant temperature, Fuel temperature, Intake air temperature and MAF sensors scalings; Temperature correction for MAF sensor.
Start of injection calculation: Start of main and pilot injection.
Torque model: Drag loss torque correction, Fuel pump drag loss part from rail pressure, Fuel temperature drag loss part; Injection volume to Torque and Torque to injection volume conversions maps.
DTC mask
|
Cars supported:
Toyota Land Cruiser 200 4.5td
Toyota Land Cruiser 70 4.5td
Lexus LX450D
|
Engines supported:
1VDFTV
|
Description updates for new software versions within the module are free of charge.
Module requires security USB dongle
The main features of the editor:
- Suitable for use by both beginners and experienced calibrators.
- Visualization of calibration data in tabular, two-dimensional, three-dimensional forms.
- Editing support: delta(+/-), percentage, value setting.
- Support for smart copy and paste (including multiple selection).
- Flexible and customizable interface with docking system.
- Ability to open several calibration cards at once.
- Automatic management of parallel maps (they are defined in the module) with the transfer of changes./
- Modular system to avoid unnecessary costs.
Downloads
Если у Вас возникли вопросы по данному товару, задавайте их через форму ниже.
BitEdit
| ЧИП-ТЮНИНГ ЭБУ
« Назад
|
